LG DVX286 Manual

The LG DVX286 is a versatile DVD player with progressive scan output, Dolby Digital and DTS compatibility, USB playback support, HDMI connectivity, and multi-format disc playback. It features a sleek design, intuitive remote control, and various audio/video enhancement options. Below are key sections covering safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. USB Playback 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with disc tray, Remote Control, HDMI output, Component video outputs, Digital audio output (coaxial), USB port, AV composite outputs.

FeatureDescription
HDMI outputFor high-definition digital video and audio connection
Component video outputsFor progressive scan video output (Y/Pb/Pr)
Digital audio output (coaxial)For connection to home theater systems
USB portFor playback of media files from USB storage devices
AV composite outputsStandard video and L/R audio outputs
POWER buttonTurns unit on/off
OPEN/CLOSE buttonOpens and closes disc tray
PLAY/PAUSE buttonStarts playback or pauses current media
STOP buttonStops playback
USB indicatorLights when USB device is detected

Installation

Unpack and inspect contents. Place on stable, level surface with adequate ventilation.

  1. Connect to TV: Use HDMI cable for best quality, or component/composite cables as needed.
  2. Connect audio: Use digital coaxial cable to home theater receiver, or analog audio cables.
  3. Connect USB device: Insert USB storage device into front USB port.
  4. Plug into AC power outlet.

WARNING! Ensure proper ventilation around unit; do not block vents. Keep away from heat sources.

First-Time Setup

Power on unit and TV; follow on-screen display if available.

  1. Select output resolution: Press SETUP, navigate to VIDEO settings, choose appropriate resolution (480p, 720p, 1080i).
  2. Set audio output: In AUDIO settings, select digital or analog output as needed.
  3. Configure language: In SETUP menu, select preferred menu language (default: ENGLISH).
  4. Set parental controls: In FEATURES menu, set rating level and password if desired.

CAUTION! Handle discs carefully; insert only one disc at a time.

Specifications

Controls and Settings

Access menu via SETUP button on remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, SETUP, NAVIGATION arrows, ENTER, AUDIO, SUBTITLE, ANGLE, ZOOM, REPEAT, A-B repeat.

Video Settings: Output resolution, TV aspect (16:9, 4:3), Progressive scan. Audio Settings: Digital output (PCM/Bitstream), Dynamic range control, Downmix. Language: Menu, audio, subtitle languages. Features: Parental control (default password 0000), DivX registration, Screen saver.

Connecting Devices

TV: HDMI or component/composite. Audio system: Digital coaxial or analog audio. USB: Front port.

  1. Turn off all devices before connecting cables.
  2. Match cable colors to connectors (component: green/blue/red).
  3. Select correct input source on TV/receiver.
  4. For HDMI: Connect single cable for both video and audio.

Tip: Use high-quality cables for best performance, especially for HDMI and component connections.

Playing Media

Supports DVD-Video, audio CDs, MP3 CDs, JPEG photo CDs.

  1. Insert disc: Press OPEN/CLOSE, place disc label-side up, close tray.
  2. Play: Press PLAY; disc usually starts automatically.
  3. Navigate: Use arrow buttons for menus; numeric buttons for direct chapter/track access.
  4. Special functions: AUDIO for alternate audio tracks; SUBTITLE for captions; ANGLE for different camera angles.
  5. Repeat: Press REPEAT to repeat chapter/track/all; A-B for custom segment repeat.
  6. Zoom: Press ZOOM during playback (2×, 4×, normal).
  7. Search: Use forward/reverse skip during playback.
  8. Resume: Most discs resume from stop point when PLAY pressed again.

WARNING! Do not move unit during disc playback. Do not use damaged or irregular discs.

USB Playback

Supports USB flash drives and external hard drives (FAT32 format).

  1. Insert USB device into front port.
  2. Press USB button on remote or select USB source from menu.
  3. 3. Navigate folders using arrow buttons; press ENTER to select files.
  4. Supported formats: Video (DivX, Xvid), Audio (MP3, WMA), Photos (JPEG).
  5. During playback: Use navigation for photo slideshows; audio controls for music.

Note: Some USB devices may require external power. Maximum capacity: 2TB.

Care & Cleaning

Unplug from power before cleaning. Use soft, dry cloth for exterior. For lens cleaning, use approved CD/DVD lens cleaner only.

CAUTION! Never use solvents, abrasives, or spray cleaners. Do not open casing; no user-serviceable parts inside.

Regulatory Information

FCC Part 15: Class B digital device compliant. Manufactured under license from Dolby Laboratories. "DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc. DivX® is a registered trademark of DivX, LLC. For customer support, visit www.lg.com or contact LG Electronics at 1-800-243-0000.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord/outletCheck power connection; try different outlet; ensure power switch on.
No pictureConnections/TV inputVerify cables secure; select correct input on TV; try different cable.
No soundAudio settings/connectionsCheck audio cables; verify TV/receiver input; check mute status.
Disc not recognizedDisc type/damageEnsure disc compatible; check for scratches; clean disc properly.
Remote not workingBatteries/obstructionsReplace batteries; point directly at sensor; remove obstacles.
USB not detectedFormat/powerReformat to FAT32; ensure device has adequate power; try different USB port.

Reset: Unplug power for 30 seconds, then reconnect.

Service: 1-800-243-0000; www.lg.com

LG DVX286 Manual © - All Rights Reserved 2025