LG DV4S2H-P Manual

The LG DV4S2H-P is a high-performance DVD player with progressive scan output, Dolby Digital and DTS decoding, multi-format disc compatibility, and USB connectivity. It features HDMI output for high-quality digital video and audio, component video outputs, optical and coaxial digital audio outputs, and a front-panel USB port for media playback. Below are key sections covering safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Remote Control, HDMI cable, Power cord, AV composite cable, User manual.

FeatureDescription
HDMI OutputFor digital high-definition video and audio connection
Component Video OutputsFor progressive scan video output
Optical/Coaxial Digital AudioFor connection to home theater systems
USB Port (Front)For playback of media files from USB storage
Multi-Format PlaybackSupports DVD, CD, MP3, JPEG, DivX formats
Dolby Digital / DTS DecoderBuilt-in decoding for surround sound formats
OPEN/CLOSEEjects and closes the disc tray
PLAY/PAUSEStarts playback or pauses the current media
STOPStops playback
POWERTurns the player on/off

Installation

Unpack and inspect all contents. Place the player on a stable, level surface with adequate ventilation.

  1. Connect to TV: Use HDMI cable for best quality, or component/composite cables as needed.
  2. Connect to Audio System: Use optical or coaxial digital audio cable to your receiver.
  3. Connect Power: Plug the power cord into a standard 120V AC outlet.
  4. Insert Batteries: Install batteries into the remote control.

WARNING! Ensure all devices are turned off before making connections. Do not block ventilation openings.

First-Time Setup

Power on the player and your TV/receiver. Follow initial setup prompts if displayed.

  1. Select Language: Use the SETUP menu to choose your preferred on-screen language.
  2. Set TV Aspect Ratio: Choose 4:3 or 16:9 based on your TV type.
  3. Configure Audio Output: Set digital audio output to match your sound system (PCM, Bitstream).
  4. Set Parental Control: Establish a password if desired (default may be 0000).

CAUTION! Place the player away from heat sources and ensure it is not covered.

Specifications

Controls and Settings

Access the OSD via the SETUP button on the remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, MENU, SETUP, AUDIO, SUBTITLE.

Setup Menu: Language, Display (TV Type, Screen Saver), Audio (Digital Output, Dynamic Range), Parental, Preferences. Playback Settings: Repeat (Title/Chapter/Track), Zoom, Angle, Audio/Subtitle selection.

Connecting Devices

HDMI: Primary connection for modern TVs. Component: For HDTVs without HDMI. Audio: Digital optical/coaxial to AV receiver.

  1. Turn off all equipment before connecting cables.
  2. Connect HDMI cable from player's HDMI OUT to TV's HDMI IN.
  3. For surround sound, connect digital audio cable to your receiver.
  4. Power on devices and select correct input source on TV/receiver.

Tip: Use high-speed HDMI cables for best performance with 1080p upscaling.

Playing Media

Supports DVD-Video, audio CDs, and files from USB or CD/DVD data discs.

  1. Insert disc: Press OPEN/CLOSE, place disc label-side up, close tray.
  2. Play: Press PLAY; use MENU for disc navigation or SKIP for chapters/tracks.
  3. USB Playback: Insert USB drive, press USB button or navigate via menu.
  4. Special Functions: REPEAT for loop play; ZOOM for picture magnification; AUDIO/SUBTITLE to change tracks.
  5. Resume: Some discs allow playback to resume from stop point.

WARNING! Do not move the player while a disc is spinning. Use only standard-sized discs.

Accessibility Features

Subtitle Display: Enable in DVD menu or via SUBTITLE button. Parental Control: Set level in setup menu to restrict playback of rated content.

Care & Cleaning

Unplug the player before cleaning. Use a soft, dry cloth to wipe the cabinet. For the lens, use a commercial CD/DVD lens cleaner only if necessary.

CAUTION! Never use solvents, aerosols, or abrasive cleaners. Do not open the casing.

Regulatory Information

FCC Part 15 Compliance: This device complies with Class B digital device limits. Copyright © LG Electronics. Macrovision: This product incorporates copyright protection technology. For customer support, visit www.lg.com or contact LG Customer Service at 1-800-243-0000.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord not connectedEnsure power cord is firmly plugged into outlet and player.
No pictureInput selection/CablesSelect correct input on TV; ensure HDMI/component cable is secure.
No soundAudio settings/ConnectionsCheck audio output settings in menu; verify audio cable connections.
Disc not recognizedDisc type/DamageEnsure disc is compatible and clean; try another disc.
Remote not workingBatteries/ObstructionReplace batteries; ensure clear line of sight to player's sensor.

Reset: Unplug power for 60 seconds, then reconnect to perform a soft reset.

Service: 1-800-243-0000; www.lg.com

LG DV4S2H-P Manual © - All Rights Reserved 2025