LG DV482-SE Manual

The LG DV482-SE is a versatile DVD player with progressive scan output, Dolby Digital and DTS decoding, USB playback, and DivX support. It features multiple audio/video outputs (composite, component, S-Video, coaxial digital audio), a front-panel USB port, and a user-friendly on-screen display. Below are key sections covering safety, features, installation, setup, operation, and troubleshooting for optimal use.

Features at a Glance

Key components: Main unit, Remote Control (with batteries), AV cable (RCA composite), User Manual, Power cord.

Feature	Description
Progressive Scan Output	Provides smoother, higher-quality picture on compatible TVs
Dolby Digital / DTS Decoder	Delivers cinematic surround sound (requires external amplifier)
USB 2.0 Port (Front)	Play video, music, and photo files from USB storage devices
DivX® Certified	Play DivX, DivX HD, and DivX VOD media files
Multiple Video Outputs	Composite, Component (YPbPr), S-Video
Digital Audio Output	Coaxial output for connection to home theater systems
PLAY/PAUSE	Starts or pauses disc playback
STOP	Stops playback
OPEN/CLOSE	Opens and closes the disc tray
POWER	Turns the player on or off

Installation

Unpack and inspect all contents. Place the player on a stable, level surface near your TV and audio system.

1. Connect Video Output: Choose one connection (Composite, Component, or S-Video) and connect to corresponding TV inputs.
2. Connect Audio Output: Use the provided RCA cable (white/red) for stereo sound, or use a digital coaxial cable to an AV receiver for surround sound.
3. Connect Power: Plug the power cord into a standard 120V AC outlet.
4. Insert Batteries: Install two AAA batteries into the remote control.

WARNING! Ensure the player has proper ventilation. Do not block vents on the sides or rear.

First-Time Setup

Power on the player and your TV. Select the correct input source on your TV (e.g., VIDEO 1, COMPONENT).

1. Initial Language: The on-screen menu will appear. Use the arrow buttons to select your preferred menu language.
2. TV Aspect Ratio: Set the screen format (4:3 or 16:9) to match your television.
3. Progressive Scan: If using component cables with an HDTV, enable Progressive Scan in the VIDEO SETUP menu for best picture quality.
4. Audio Output: Configure digital audio output (PCM or Bitstream) based on your audio system's capabilities.

CAUTION! Always turn off the player and TV before making or changing cable connections.

Specifications

• Disc Compatibility: DVD-Video, DVD±R/RW, CD, CD-R/RW, MP3 CD, JPEG CD.
• Video Decoding: MPEG2, DivX, DivX HD.
• Audio Decoding: Dolby Digital, DTS, MP3, WMA.
• Output Resolution: 480i, 480p (via component).
• Connectors: Composite Video (RCA), Component Video (YPbPr), S-Video, Stereo Audio (L/R), Coaxial Digital Audio, USB 2.0.
• Power Supply: 120V AC, 60Hz.
• Power Consumption: Approx. 10W (Operation), <1W (Standby).
• Dimensions (W x H x D): Approx. 16.9" x 2.4" x 10.2".

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP. Display Window shows current status and track/time.

Remote Control: POWER, Numeric buttons, OPEN/CLOSE, NAVIGATION arrows, OK, MENU, RETURN, AUDIO (for alternate tracks/subtitles), SUBTITLE, REPEAT, ZOOM, SEARCH.

On-Screen Menu: Access by pressing MENU. Settings are organized into VIDEO (Aspect Ratio, Progressive Scan), AUDIO (Digital Output, Dynamic Range), LANGUAGE (Menu, Disc Default), and SYSTEM (Parental Lock, Default Reset).

Connecting to Your TV & Audio System

For best results, use the highest quality connection your equipment supports.

1. For Standard TVs: Use the included composite (yellow/white/red) cable.
2. For Enhanced Picture (HDTV-ready): Use component video cables (green/blue/red) for 480p progressive scan.
3. For Surround Sound: Connect the coaxial digital audio output to your AV receiver.
4. USB Playback: Insert a USB drive into the front port. Use the remote to navigate files.

Tip: Match the TV's input source to the connection used (e.g., select "COMPONENT" on TV menu if using component cables).

Playing Discs & USB Media

Supports DVD-Video, audio CDs, MP3/WMA/JPEG discs, and USB media with supported files.

1. Insert Disc/USB: Press OPEN/CLOSE, place disc label-side up, or insert USB drive.
2. Play: Press PLAY. Use the navigation buttons to select titles, chapters, or files.
3. Pause/Scan: Press PAUSE to freeze frame. Press SEARCH left/right for slow scan; hold for fast scan.
4. Stop/Eject: Press STOP once for pause memory, twice to clear memory. Press OPEN/CLOSE to eject disc.
5. Skip Tracks/Chapters: Use PREV/NEXT buttons.
6. Repeat: Press REPEAT to repeat a chapter, track, title, or all.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Advanced Playback Features

Zoom: Press ZOOM during playback to magnify picture (2X, 4X). Use navigation buttons to pan.

Parental Control: Set a password in SYSTEM menu to restrict playback of DVDs based on rating (default password is 0000).

Bookmark: Press BOOKMARK (if available on remote) to save up to 3 resume points on a disc.

Audio/Subtitle Selection: Press AUDIO or SUBTITLE during playback to cycle through available tracks.

Care & Maintenance

Unplug the player from the power outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, dampen the cloth slightly with water. Do not use solvents or abrasive cleaners.

Clean discs by wiping gently from center to edge with a soft, lint-free cloth. Do not use record cleaners or solvents.

CAUTION! Never allow liquid to enter the unit through vents or the disc tray. Keep the unit away from direct heat sources and high humidity.

Regulatory Information

FCC Part 15 Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © LG Electronics Inc. DivX®, DivX Certified®, and associated logos are trademarks of DivX, LLC. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For customer support, visit www.lg.com or contact LG Customer Service at 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into the player and the wall outlet.
No picture	Incorrect TV input selected	Press INPUT or SOURCE on your TV remote to select the correct video input.
No sound	Audio cables/Mute	Check audio cable connections. Ensure TV or receiver is not muted. Verify audio output setting in player menu.
Disc will not play	Disc format/Damage	Ensure disc is compatible and not severely scratched. Check region code of DVD.
Remote not working	Batteries/Obstruction	Replace remote batteries. Ensure nothing is blocking the infrared sensor on the player.
USB device not recognized	Format/File system	Ensure USB drive is formatted as FAT32. Check if file format is supported (DivX, MP3, JPEG).

Reset: If the player behaves unexpectedly, unplug it from the power outlet for one minute, then plug it back in.

Service: For technical support, visit www.lg.com or call 1-800-243-0000.