LG DV286K Manual

The LG DV286K is a versatile DVD player with progressive scan output, Dolby Digital and DTS decoding, USB playback, DivX compatibility, HDMI connectivity, and multi-format disc support. It features a sleek design, intuitive remote control, and various audio/video enhancement technologies for an optimized home entertainment experience. Below are key sections covering features, setup, operation, specifications, and troubleshooting.

Features at a Glance

Key components: Main unit with disc tray, Remote Control, HDMI output, Component video output, Composite AV output, Digital audio output (coaxial), USB port.

Feature	Description
HDMI Output	For high-definition digital video and audio connection
Component Video Output	For progressive scan video output
Composite AV Output	Standard video and audio connection
Digital Audio Output (Coaxial)	For Dolby Digital/DTS bitstream output
USB Port	For playback of media files from USB storage devices
Power Input	For AC power connection
OPEN/CLOSE	Opens and closes disc tray
PLAY/PAUSE	Starts playback or pauses current media
STOP	Stops playback
POWER	Turns unit on/off

Installation

Unpack and inspect contents. Place on stable, level surface with adequate ventilation.

1. Connect to TV: Use HDMI cable for best quality, or component/composite cables as needed.
2. Connect audio: Use digital coaxial cable to AV receiver for surround sound, or use stereo RCA cables.
3. Connect USB device: Insert USB storage device into front USB port.
4. Plug into AC power outlet.

WARNING! Ensure proper ventilation around unit. Do not place in enclosed cabinet or near heat sources.

First-Time Setup

Power on unit; follow on-screen setup wizard if available.

1. Select language: Choose preferred menu language (default: ENGLISH).
2. Set TV aspect ratio: Choose 4:3 or 16:9 based on your TV.
3. Configure audio output: Set to Bitstream or PCM based on your audio system.
4. Set parental controls: Enter default password (0000) to configure restrictions.
5. Test connections: Play sample content to verify video/audio output.

CAUTION! Handle discs carefully; insert only one disc at a time.

Specifications

• Disc Compatibility: DVD-Video, DVD±R/RW, CD, CD-R/RW, MP3 CD, JPEG CD.
• Video Output: HDMI 1080p/720p/480p, Component 480p/480i, Composite 480i.
• Audio Decoding: Dolby Digital, DTS, MPEG Audio.
• USB Playback: Supports MP3, WMA, JPEG, DivX, Xvid, MPEG4 files.
• Progressive Scan: Yes, via component or HDMI output.
• Terminals: HDMI, Component, Composite, Coaxial digital audio, USB.
• Power Requirements: 120V AC, 60Hz, 15W.
• Operating Temperature: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Access menu via SETUP button on remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, MENU, SETUP, AUDIO, SUBTITLE, ZOOM.

Setup Menu: Language, Display (Aspect Ratio, Screen Saver), Audio (Digital Output, Dynamic Range), Parental (Rating Limit, Password), System (Default Reset). Playback Settings: Repeat (Title/Chapter/Track), Random Play, Zoom (2x, 4x), Angle Selection, Subtitle Language, Audio Track.

Connecting Devices

TV: HDMI or component/composite. Audio System: Digital coaxial or analog RCA. USB: Front port.

1. Turn off all devices before connecting cables.
2. Use high-quality cables for best performance.
3. Select correct input source on TV/receiver.
4. For HDMI: Connect single cable for both video and audio.

Tip: For 5.1 surround sound, connect digital audio output to compatible AV receiver.

Playing Media

Supports DVD-Video, audio CDs, MP3 CDs, JPEG photo CDs.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up, close tray.
2. Play: Press PLAY; disc usually starts automatically.
3. Navigate: Use SKIP buttons for chapters/tracks; MENU for disc menus.
4. Special functions: REPEAT for loop playback; RANDOM for shuffle; ZOOM for magnification.
5. Audio options: Press AUDIO to select different audio tracks or surround modes.
6. Subtitle options: Press SUBTITLE to select subtitle language or turn off.
7. Resume: Most discs resume from last stop point when PLAY pressed.

WARNING! Do not move unit during playback. Avoid using damaged or dirty discs.

USB Playback

Play media files from USB flash drives or external hard drives.

1. Insert USB device into front port.
2. Press USB button on remote or select USB source from menu.
3. Navigate folders using arrow buttons.
4. Select file and press PLAY.
5. Supported formats: Video (DivX, Xvid, MPEG4), Audio (MP3, WMA), Photos (JPEG).

Note: Some USB devices may require additional power. Format as FAT32 for best compatibility.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean lens only with approved CD/DVD lens cleaner.

CAUTION! Never use abrasive cleaners, solvents, or compressed air. Keep away from liquids and extreme temperatures.

Regulatory Information

FCC Part 15 Class B compliant. This device complies with Industry Canada license-exempt RSS standard(s). Copyright © LG Electronics. DivX, DivX Certified, and associated logos are trademarks of DivX, LLC. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For support, visit www.lg.com or contact LG Customer Service at 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet; ensure unit switched on.
No picture	Cables/input selection	Verify cable connections; select correct input on TV; try different cable.
No sound	Audio settings/cables	Check audio output settings; verify cable connections; adjust TV/receiver volume.
Disc won't play	Disc type/damage	Ensure disc is compatible; check for scratches; clean disc; try different disc.
Remote not working	Batteries/obstructions	Replace batteries; point remote at sensor; remove obstacles.
USB not recognized	Format/compatibility	Reformat as FAT32; ensure device is powered; try different USB device.

Reset: Unplug for 60 seconds, or use Factory Reset in System menu.

Service: 1-800-243-0000; www.lg.com