LG DKE575XB Manual

The LG DKE575XB is a high-performance dishwasher featuring advanced cleaning technology, multiple wash cycles, energy-saving modes, and smart connectivity options. Designed for modern kitchens, it offers quiet operation, efficient water usage, and customizable settings for various dishwashing needs. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Cycles and Options 8. Care & Maintenance 9. Smart Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, adjustable racks, spray arms, detergent dispenser, control panel, and smart sensors.

FeatureDescription
Quiet OperationAdvanced insulation and motor design for low noise levels
Multiple Wash CyclesIncludes Normal, Heavy, Eco, Quick, and Rinse cycles
Adjustable RacksFlexible loading for various dish sizes and types
Smart SensorsAutomatically adjusts water and energy usage based on load
Delay StartProgram wash cycles to start at a later time
Child LockPrevents accidental changes to settings
Energy Star CertifiedMeets energy efficiency standards
Wi-Fi ConnectivityRemote control and monitoring via smartphone app
Soil SensorDetects dirt level and adjusts cycle accordingly
Half Load OptionSaves water and energy for smaller loads

Installation

Unpack and inspect contents. Ensure proper location and connections.

  1. Choose location: Near water supply, drain, and electrical outlet.
  2. Connect water supply: Attach inlet hose to water source; ensure tight connection.
  3. Connect drain hose: Route to sink drain or garbage disposal.
  4. Level the dishwasher: Adjust feet for stability.
  5. Plug into electrical outlet: Use grounded outlet only.

WARNING! Ensure water and electrical connections are secure to prevent leaks or hazards. Follow local codes.

First-Time Setup

Power on dishwasher; follow initial setup steps.

  1. Remove shipping materials: Take out all tapes and blocks inside.
  2. Run initial rinse cycle: Use Quick Rinse to clean interior.
  3. Set preferences: Configure language, time, and default settings via control panel.
  4. Load detergent: Fill detergent dispenser with recommended detergent.
  5. Test run: Run a Normal cycle to ensure proper operation.

CAUTION! Do not use regular dish soap; use only dishwasher detergent to avoid suds overflow.

Specifications

Controls and Settings

Access settings via control panel or smart app. Control Panel: POWER, CYCLE SELECTION, OPTIONS, START/PAUSE, DELAY START.

Display Indicators: Cycle progress, time remaining, error codes, options selected.

Cycle Selection: Normal (everyday dishes), Heavy (pots/pans), Eco (energy-saving), Quick (light soil), Rinse (rinse only), Delicate (fine china). Options: Delay Start (1-24 hours), Half Load (upper/lower rack), Extra Dry (heated dry), Sanitize (high-temperature wash). Settings: Language, time, volume, child lock, default cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

  1. Scrape off large food particles; no need to pre-rinse.
  2. Load lower rack: Pots, pans, plates, bowls; face soiled surfaces toward spray arm.
  3. Load upper rack: Glasses, cups, mugs, small bowls; secure in racks.
  4. Utensil basket: Place knives (blade down), forks, spoons; mix types for better cleaning.
  5. Adjust racks: Raise/lower as needed for tall items.
  6. Ensure items do not block spray arms or detergent dispenser.

Tip: Place delicate items on top rack; avoid nesting items.

Wash Cycles and Options

Select cycle based on load type and soil level.

  1. Normal: For everyday dishes; balanced cleaning and energy use.
  2. Heavy: For heavily soiled pots/pans; higher temperature and longer wash.
  3. Eco: Energy-efficient; lower temperature and water usage.
  4. Quick: For lightly soiled loads; shorter cycle time.
  5. Rinse: Rinses without detergent; use for future loads.
  6. Delicate: For fine china/crystal; gentle wash and lower temperature.
  7. Options: Add Extra Dry for drier dishes; Sanitize for germ reduction.
  8. Delay Start: Set to run during off-peak hours.

WARNING! Do not open door during cycle; hot steam may escape.

Care & Maintenance

Regular maintenance ensures longevity and performance.

  1. Clean filter monthly: Remove and rinse under water.
  2. Wipe door gasket: Use damp cloth to remove debris.
  3. Clean spray arms: Check for clogs; rinse if needed.
  4. Run cleaning cycle: Use dishwasher cleaner every 3-6 months.
  5. Check drain hose: Ensure no kinks or blockages.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Smart Features

Connect to Wi-Fi for remote control and monitoring.

  1. Download LG ThinQ app from app store.
  2. Follow in-app instructions to connect dishwasher to home network.
  3. Remote start/stop: Control cycles from smartphone.
  4. Notifications: Receive alerts when cycle ends or if issues arise.
  5. Diagnostics: Run remote diagnostics for troubleshooting.
  6. Software updates: Receive automatic updates for new features.

Note: Requires 2.4 GHz Wi-Fi network; compatible with iOS and Android.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star certified; meets DOE efficiency standards. Copyright © 2023 LG Electronics; trademarks of LG Corp. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/doorEnsure plugged in; door closed securely; check circuit breaker.
Poor cleaning resultsLoading/detergentReload dishes properly; use recommended detergent; clean filter.
Water not drainingDrain hose/clogCheck for kinks; clean filter; ensure drain hose is not blocked.
Leaking waterDoor seal/hoseCheck door gasket for debris; tighten hose connections.
Unusual noiseSpray arm/itemsEnsure spray arms rotate freely; check for loose items touching spray arm.
Error code displayedSensor/component issueRefer to manual for code meaning; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-243-0000; www.lg.com

LG DKE575XB Manual © - All Rights Reserved 2025